Projects – Intelligent Automation System
LOGISTIC QUEUE SYSTEM
AC MONITORING SYSTEM
CCTV COMAND CENTER
EOB (ENTERTAINMENT ON BOARD) APPLICATION ON TRAINS
SMART WTP DESIGN PROJECT
PABX MONITORING
The central natural signal will be activated when the alarm code on the telephone in the hotel room or in a room in the building is pressed
The System Ringing notification of danger signs will be activated on all connected telephones. If the telephone is answered, a warning sound will be heard and the ringing will stop
The system capacity can be adjusted to existing conditions
Can be used for all types of PABX
No additional license required
For analog extensions
Modular system
Setting system parameters via Console or Application
SMART ELECTRONIC SPORT SYSTEM
Detects runner speed and time in real time
Displays runner performance details starting from FO2MAX, time, score and graphs
Detects heartbeat and step parameters for each runner in one prototype sensor device
Data for each running event can be converted into excel and pdf formats
Dashboard display can be accessed on Tab or smartphone
Portable so easy to carry anywhere
Web Dashboard
WIRELESS SENSOR NETWORK (WSN) BASED MONITORING SYSTEM AT PLTH LOCATION
1.HOW THE SYSTEM WORKS IN GENERAL
The monitoring system is a system that is able to receive data from sensors connected to the monitoring system to be sent to the Control Center so that the data can be observed or monitored by officers. The locations of the sensors are far from each other.
The data can be sent via media: cable, radio, and so on. In this system, data from sensor locations at PLTH locations that are far from each other are first collected to the Control Room (at the PLTH location) via Wireless Sensor Network (WSN) technology. After the data is collected, it is then sent to the Control Center in Jakarta via Internet communication (WEB technology). One of the reasons for using WSN is because it is not possible to use a cable network. Where the environmental conditions are very extreme (on the coast) and far apart.
·The device or module that is tasked with sending data from the sensor to the Control Room is called the WSN Data Logger Device or Module.
Advantages of WSN compared to similar technologies:
Using 2.4 GHz carrier frequency.
Low power
Easy to install
WSN (not IP Based) uses IEEE 802.15.4 Protocol.
Low Cost
2. THE LINE DIAGRAM OF THE WSN MONITORING SYSTEM IS SHOWN IN THE FOLLOWING FIGURE
3. PHOTOS OF WSN DATA LOGGER LOCATIONS
4. EXAMPLE OF THE MONITORING APPLICATION PROGRAM DISPLAY INSTALLED ON A PC COMPUTER IN THE CONTROL ROOM AT THE JAKARTA LOCATION
PLC BASED GARBAGE MACHINE SYSTEM AUTOMATION (DESIGN)
CCTV HOUSING AREA
CCTV MINI MARKET
SMART HOME EXAMPLE HOUSE IN BANDUNG
DATA LOGGER
Maximum storage capacity 5 months---SD Card: 2 Gbyte
Data retrieval with or via Infra Red. The distance between Data Loader and Data Logger is a maximum of 10 m and the transmission time required is approximately 30 minutes for 2-weekly data retrieval.
Application program features:
Data can be in the form of graphs with hourly, daily, monthly options.
Charging current graph - charging voltage.
Usage current graph - usage voltage.
Displays graphs 2 and 3 simultaneously.
SOLAR POWER PLANT MONITORING SYSTEM
PUBLIC STREET LIGHTING MONITORING SYSTEM
General Monitoring System Features:
Real-time monitoring data delivery.
Can detect lamp life
Detect lamp power source (PLN or Battery)
Monitoring Charging and Discharging processes
Application Software Features:
Data can be in the form of graphs with hourly, daily, monthly options.
Charging current graph - charging voltage
Usage current graph - usage voltage
Displays both graphs above simultaneously.
Displays lamp usage age.
PUBLIC STREET LIGHTING MONITORING SYSTEM DATA LOGGER
TEST BENCH
AIRFIELD LIGHTING CONTROL AND MONITORING SYSTEM SIMULATOR
EDUTAINMENT MODEL
ELECTRONICS MODULE